Accessories
MED Connector Cover [MED-CC05]
- Cover the entire MED Connector (MED-C05 with MED-CPB02) and helps to maintain the bath temperature in the MED Probe.
- Built-in gas port.
- Easy drug delivery port on top of the lid.
- Specifications
-
General information Size W132 x D92 x H120 (mm) Weight 389 g (main body: 339 g) Material Acrylic resin Accessories Gas port, lid, conical flask
MED Connector Cover [MED-CC06]
- Cover the entire MED Heated Connector (MED-CP04) and helps to maintain the bath temperature in the MED Probe.
- Built-in gas port.
- Easy drug delivery port on top of the lid.
- Specifications
-
General information Size W215 x D120 x H95 (mm) Weight 491 g (main body: 443 g) Material Acrylic resin Accessories Gas port, lid, conical flask
MED Connector Cover [MED-CC07]
- Cover the entire MED Connector (MED-C11 with MED-CPB02) and helps to maintain the bath temperature in the MED Probe.
- Built-in gas port.
- Easy drug delivery port on top of the lid.
- Specifications
-
General information Size W220 x D120 x H108 (mm) Weight 602 g (main body: 577 g) Material Acrylic resin Accessories Gas port, lid, conical flask
MED Perfusion Cap [MED-KCAP01]
- Neatly fits into the top of a MED Probe.
- Features adjustable solution inflow and outflow pipes, a platinum reference electrode, and a port for delivery of gas.
- Easily removed and replaced for slice mounting.
- Suitable for MED Probe with 10 mm chamber height.
- Pre-configured perfusion tubing available for immediate use.
- Specifications
-
Material Main body ABS, stainless steel screws Inlet pipe stainless steel Outlet pipe stainless steel Reference electrode platinum
MED Perfusion Cap Kit [MED-KCAP01TU]
- MED Perfusion Cap with perfusion tubing optimized for peristaltic pump (MINIPULS model 312 MP2, Gilson).
- Specifications
-
Material Main body ABS, stainless steel screws Inlet pipe stainless steel Outlet pipe stainless steel Reference electrode platinum
MED Pipe Holder [MED-KPK02]
- Installed onto the MED (Heated) Connector.
- Features adjustable solution inflow and outflow pipes, and a platinum reference electrode.
- Suitable for MED Probe with 5 mm chamber height.
- Pre-configured perfusion tubing available for immediate use.
- Specifications
-
Material Pipe holder ABS, stainless steel screws Inlet pipe stainless steel Outlet pipe stainless steel Reference electrode platinum
MED Perfusion Pipe Holder Kit [MED-KPK02TU]
- MED Pipe Holder with perfusion tubing optimized for peristaltic pump (MINIPULS model 312 MP2, Gilson).
- Specifications
-
Material Pipe holder ABS, stainless steel screws Inlet pipe stainless steel Outlet pipe stainless steel Reference electrode platinum
Slice Recovery Chamber [MED-RC01]
- For recovering acute brain slices made under ice-cold temperature. Combine with 200 ml flask filled with aCSF for use.
- Equip a guide port to connect tubing for oxygen babbling.
- Specifications
-
General information Size W50 x D60 x H47 (mm) Weight 17 g Material acrylic resin
Shield Plate [MED-KSYSB1]
- Block magnetic field induced noise caused by incubator.
- Put under the MED Connector for use.
- Specifications
-
General information Size W200 x H10 x D170 (mm) Weight 906 g Material aluminum
68-Pin SCSI Cable [MED-CB1]
- A 2 m cable connecting MED64 Head Amplifier and MED Connector.
- Wrapped by electrical conductive tape for shielding.
