We are a group company of SCREEN Holdings Co., Ltd.

SCREENホールディングス

PRODUCTSHARDWARE

Amplifers

MED64 Integrated Amplifier [MED-A64HD1]

  • A new 64-channel amplifier integrated MED-A64MD1A and MED-A64HE1S into one unit with their functions remained.
  • A switching dial to display a trigger output signal to an external device (i.e. MED-S11 or MED-S12 etc.) on ch1 is equipped standard.


SPECIFICATIONS
General Information
SizeW430 x D437 x H74 (mm)
Weight6.5 kg
Amplifier
Number of channels64
Gainx 20 - 217
Bandwidth0.1 Hz - 10 kHz
Analog low-cut filter0.1/ 1/ 10/ 100 Hz
Analog high-cut filter1/ 2/ 2.5/ 5/ 7.5/ 10 kHz
Input impedance100 MΩ
Digitizer
Resolution16 bit
Sampling rate20 kHz/ch
OutputUSB
Power Adaptor
InputAC 100 - 240 V (50/60 Hz)
OutputDC ±12 V

MED64 Main Amplifier [MED-A64MD1A] *discontinued

  • Broad acquisition bandwidth of 0.1 Hz -10 kHz.
  • Low-cut filter (High-pass filter) with 0.1, 1, 10, and 100 Hz cutoff.
  • Built-in digitizer.
  • USB connection to computer.


SPECIFICATIONS
General Information
SizeW430 x D437 x H74 (mm)
Weight5.9 kg
Amplifier
Number of channels64
Gainx 20 - 217
Bandwidth0.1 Hz - 10 kHz
Analog low-cut filter0.1/ 1/ 10/ 100 Hz
Analog high-cut filter1/ 2/ 2.5/ 5/ 7.5/ 10 kHz
Input impedance100 MΩ
Digitizer
Resolution16 bit
Sampling rate20 kHz/ch
OutputUSB
Power Adaptor
InputAC 100 - 240 V (50/60 Hz)
OutputDC ±12 V

MED64 Main Amplifier [MED-A64MD3]

  • Broad acquisition bandwidth of 0.1 Hz -10 kHz.
  • Low-cut filter (High-pass filter) with 0.1, 1, 10, and 100 Hz cutoff.
  • Built-in digitizer.
  • USB connection to computer.


SPECIFICATIONS
General Information
SizeW430 x D437 x H74 (mm)
Weight5.9 kg
Amplifier
Number of channels64
Gainx 20 - 217
Bandwidth0.1 Hz - 10 kHz
Analog low-cut filter0.1/ 1/ 10/ 100 Hz
Analog high-cut filter1/ 2/ 2.5/ 5/ 7.5/ 10 kHz
Input impedance100 MΩ
Digitizer
Resolution16 bit
Sampling rate20 kHz/ch
OutputUSB
Power Adaptor
InputAC 100 - 240 V (50/60 Hz)
OutputDC ±12 V

MED64 Head Amplifier [MED-A64HE1S] *discontinued

  • Built-in 2 channel current-driven stimulator.
  • 64ch x 1 and 16ch x 4 input terminals allowing connection to all types of connectors.
  • A whole system in cobination with MED-A64MD1A.


SPECIFICATIONS
General Information
SizeW430 x D437 x H74 (mm)
Weight6.6 kg
Amplifier
Number of channels64
Gainx 10
Bandwidth0.1 Hz - 10 kHz
Input impedance100 MΩ
Output impedance10 kΩ
Noise level±7 uV peak to peak
Stimulator
Number of channels2
Output formatCurrent-driven
Maximum input voltage±4 V
Maximum output current±200 uA
Power Adaptor
InputAC 100 - 240 V (50/60 Hz)
OutputDC ±12 V

MED64 Head Amplifier [MED-A64HE3]

  • Built-in 2 channel voltage-driven stimulator enabling to deliver identical stimuli to all electrodes simulataneously .
  • 64ch x 1 and 16ch x 4 input terminals allowing connection to all types of connectors.
  • A whole system in cobination with MED-A64MD3.


SPECIFICATIONS
General Information
SizeW430 x D437 x H74 (mm)
Weight6.6 kg
Amplifier
Number of channels64
Gainx 10
Bandwidth0.1 Hz - 10 kHz
Input impedance100 MΩ
Output impedance10 kΩ
Noise level±7 uV peak to peak
Stimulator
Number of channels2
Output formatVoltage-driven
Maximum input voltage±4 V
Maximum output voltage±2 V
Power Adaptor
InputAC 100 - 240 V (50/60 Hz)
OutputDC ±12 V

MED64-Presto Amplifier [MED-A384iN]

  • Amplifier dedicated to 6, 24, and 48 multi-well format MEA plate.
  • Industry leading high-sensitivity, low-noise system [0.9 µV (< 3 kHz)], providing excellent signal-to-noise.
  • New carbon nanotube electrodes provide a friendly substrate for cells to adhere.
  • Transparent glass base allows clear visibility of cells and compatibility with imaging.
  • Integrated stage heater and environmental chamber.
  • Modern, state of the art software.


SPECIFICATIONS
General Information
Amplifier sizeW300 x D388 x H155 (mm)
Amplifier weight8.4 kg
Amplifier power supplyDC ±12 V
Amplifier power consumption25 W
Temperature controller sizeW150 x D110 x H50 (mm)
Temperature controller weight366 g
Temperature controller power supplyDC ±12 V
Temperature controller power consumption30 W
Amplifier
Number of channels384
Gainx 1000
Bandwidth0.1 Hz - 5 kHz
Input impedance100 MΩ
Input leakage current30 pA
Maximum input range±5 mV peak to peak
Digitizer
Number of channel384
Resolution16 bit
Sampling rate20 kHz/ch
Maximum input range±5 mV peak to peak
Stimulator
Number of channel1
Output channelSpecified one or two channel
Output formatVoltage-driven
Maximum input voltage±4 V
Maximum output voltage±2 V
Input : output2 : 1
External Stimulator
Number of channel1
Output channelSpecified one or two channel
Output formatVoltage-driven
Maximum input voltage±4 V
Maximum output voltage±2 V
Input : output2 : 1
Digital Control Output
Number of terminals1
Output voltage4 V peak to peak
Connector
Contact pin formatSpring probe with 14 mm stroke
Contact pin materialGold
Number of pins432 (including 48 reference channels)
Temperature Controller
HeaterTransistor x 4
SensorSensor IC
Temperature controllerOmron E5GC
Range of verified < 1℃ 32 - 37℃ (Ta=25℃)
Temperature accuracy±0.1℃
Power Adaptor (x 2)
InputAC 100 - 240 V (50/60 Hz)
OutputDC ±12 V
Power consumption60 W

MED64-Entry Amplifer [MED-A16HM1]

  • Broad acquisition bandwidth of 0.1 Hz -10 kHz.
  • Acquire signals from pre-specified 16 out of 64 electrodes on the MED probe.
  • Built-in 2 channel current-driven stimulator.
  • eSATA connection to computer.


SPECIFICATIONS
General Information
SizeW215 x D437 x H74 (mm)
Weight3.3 kg
Amplifier
Number of channels16
Gainx 100
Bandwidth0.1 Hz - 10 kHz
Input impedance100 MΩ
Digitizer
Resolution16 bit
Sampling rate20 kHz/ch
Output formatD-sub 68 pin x 2
Power Adaptor
InputAC 100 - 240 V (50/60 Hz)
OutputDC ±12 V

Connectors

MED Connector [MED-C03]

  • Provides a mechanically-stable platform for the MED Probe.
  • No active onboard electrical circuitry; Connectors can safely be placed in a humidified environment (e.g. cell culture incubator).
  • Provides clear optical path through MED Probe for microscopy.


SPECIFICATIONS
General Informations
SizeW174 x D150 x H21 (mm)
Wegiht480 g
MaterialAluminum, Gold plate for contact pins
MED Probe securing mechanismScrew down
Contact resistance< 30 mΩ

MED Duet Connector [MED-C05]

  • Connector for the MED64-Quad II System.
  • Used for communication between the MED Probe 16 and the MED64 Head Amplifier.
  • Two sets of MED Probe 16 is installed into.
  • No active onboard electrical circuitry; Connectors can safely be placed in a humidified environment (e.g., cell culture incubator).
  • Compact design. Easy-to-load MED Probe 16.
  • Compatible with all types of MED Probe 16.


SPECIFICATIONS
General Information
SizeW130 x D85 x H30 (mm)
Weight381 g
MaterialAluminum, Gold plate for contact pins
MED Probe securing mechanismSlide in
Contact resistance< 30 mΩ

MED Multi-well Connector [MED-C11]

  • Connector for the MED64-Allegro System.
  • Used for communication between the MED Multi-well Probe and the MED64 Head Amplifier.
  • No active onboard electrical circuitry; Connectors can safely be placed in a humidified environment (e.g. cell culture incubator).
  • Compact design.
  • Easy–to-load the MED Multi-well Probe.


SPECIFICATIONS
General Infromation
SizeW210 x D83 x H34 (mm)
Weight700 g
MaterialAluminum, Gold plate for contact pins
MED Probe securing mechanismSlide in
Contact resistance< 30 mΩ

MED Heated Connector [MED-CP04]

  • Heater and thermocouple sensors are incorporated into the bottom unit of the MED Connector.
  • Bath temperature in the MED Probe is maintained using a dedicated temperature controller.
  • Can be used with or without perfusion. Included tubing through connector provides in-line solution heating.
  • Aperture in the unit bottom allows observing biological samples with microscope.


SPECIFICATIONS
General Information
SizeConnector: W200 x D112 x H21 (mm)
Temperature controller: W153 x D115 x H50 (mm)
WeightConnector: 510 g
Temeprature controller: 357 g
MaterialAluminum, Gold plate for contact pins
MED Probe securing mechanismScrew down
Contact resistance< 30 mΩ
HeaterTransistor
Temperature accuracy±0.1℃
Range of verified < 1℃ with perfusion: < 32℃ (Ta=25℃)
without perfusion: > 37℃ (Ta=25℃)

Others

MED64 Multiplexer [MED-A64SF1]

  • Multiplexer used for the MED64 Plex 4/8 System.
  • Allowing time-sequenced acquisition from 4 or 8 samples.


SPECIFICATIONS
General Information
SizeW430 x D437 x H74 (mm)
Weight6.1 kg
Number of throght input-
Gainx 1
Maximum input/output voltage±4 V
Control signal3 bit BCO
Control signal levelTTL
Power Adaptor
InputAC 100 - 240 V (50/60 Hz)
OutputDC ±12 V

MED64 Multiplexer [MED-A64SF2]

  • Multiplexer used for the MED64 Plex 8 System.
  • Allowing time-sequenced acquisition from 4 or 8 samples.


SPECIFICATIONS
General Information
SizeW430 x D437 x H74 (mm)
Weight6.2 kg
Number of throght input1 (Input 1-4)
Gainx 1
Maximum input/output voltage±4 V
Control signal3 bit BCO
Control signal levelTTL
Power Adaptor
InputAC 100 - 240 V (50/60 Hz)
OutputDC ±12 V

MED Thermo Pad [MED-CPB02]

  • Thermo pad for MED Duet Connector. Loading a MED-C05 or a MED-C11 to maintain temperature around recording electrodes on the MED Probe with internal controller.


SPECIFICATIONS
General Informations
SizeW160 x D125 x H54 (mm)
Weight602 g
MaterialAluminum
HeaterTransistor
Temperature accuracy±0.1℃
Range of verified < 1℃ With perfusion: < 32℃ (Ta=25℃)
Without perfusion: > 37℃ (Ta=25℃)

Data Acquisition PC [MED-D0T]

  • Desktop PC and display monitor satisfying specifications for MED64 system (sold only in Japan).


SPECIFICATIONS
General Information
SizeDesktop PC: W175 x D385 x H365 (mm)
Display monitor: W533 x D180 x H388 (mm)
WeightDesktop PC: 6.9 kg
Display monitor: 4.0 kg
Case typeMini tower
OSWindows 10 Pro 64bit
CPUIntel Core i7-6700K (4 core/ 4.00GHz/ 8MB cache)
RAM16GB (8GB x 2)
Main disk512GB SSD
2nd disk2TB HDD (7200rpm/6Gbps)
Display monitor23 inchs with 1920 x 1080 resolution
AccessoriesKeyboard, Mouse
Power Adaptor
InputAC 100 - 240 V (50/60 Hz)
OutputDC ±12 V

MED Feedback Stimulator [MED-S07]

  • Receives an analog signal from one of 64 electrodes as a trigger to start stimuli at any time.
  • Stimulus pattern signals are configured on the dedicated program independent of Mobius. Enabling modification of stimulus interval or intensity in real-time, expand the width of experiments.


SPECIFICATIONS
General Information
SizeW265 x D180 x H55 (mm)
Weight850 g
MaterialAluminum, Iron
Output formatBiphasic voltage
Number of output2 (-+/+-)
Maximum output voltage±4 V
Output pulse duration0.1 - 2.0 ms (0.1 ms)
Output pulse interval1 - 5000 ms (1 ms)
Power Adaptor
InputAC 100 - 240 V (50/60 Hz)
OutputDC ±12 V

MED Pacing Controller [MED-S09]

  • External stimulus pulse generator mainly designed for pacing cardiac cells or tissue with MED64-Basic.
  • Unlike standard software control, enabling modification of stimulus interval or intensity by the control panel on the front of the main unit while data acquisition.
  • Also enabling keep stimulating cardiac cells or tissue while data acquisition is stopped.


SPECIFICATIONS
General Information
SizeW265 x D180 x H55 (mm)
Weight850 g
MaterialAluminum, Iron
Output formatBiphasic voltage
Number of output2 (-+/+-)
Maximum output voltage±4 V
Output pulse duration0.1 - 2.0 ms (0.1 ms)
Output pulse interval1 - 5000 ms (1 ms)
Power Adaptor
InputAC 100 - 240 V (50/60 Hz)
OutputDC ±12 V

MED Opto Stimulator [MED-S11]

  • Enables to deliver light stimulation at arbitrary time and intensity based on trigger input from MED64 Integrated Amplifier.
  • Dedicated blue and white LED unit is supported.
  • Stimulus events can be recorded on ch1 by switching the dial of MED64 Integrated Amplifier.


SPECIFICATIONS
General Information
SizeController: W215 x D230 x H75 (mm)
LED unit (head): W30 x D55 x H25 (mm)
LED unit (cable): 2 (m)
WeightController: 1.8 kg
LED unit: 146 g
MaterialAluminum, Iron
Power Adaptor
InputAC 100 - 240 V (50/60 Hz)
OutputDC ±12 V

MED Opto Stimulator [MED-S12]

  • Enables to deliver light stimulation at arbitrary time and intensity based on trigger input from MED64 Integrated Amplifier.
  • Dedicated green, red, amber and blue LED unit is supported.
  • Stimulus events can be recorded on ch1 by switching the dial of MED64 Integrated Amplifier.


SPECIFICATIONS
General Information
SizeController: W215 x D230 x H75 (mm)
LED module (head): W30 x D55 x H25 (mm)
LED module (cable): 2 (m)
WeightController: 1.8 kg
LED unit: 146 g
MaterialAluminum, Iron
Power Adaptor
InputAC 100 - 240 V (50/60 Hz)
OutputDC ±12 V

MED Ring Pump [MED-KTP01] *discontinued

  • DC motor pump with unchangeable flow rate, but extremely low loading to tubing.
  • Its compact size saves space to install.


SPECIFICATIONS
General Information
SizeW110 x D90 x H86 (mm)
Weight340 g

MED Ring Pump [MED-KTP02]

  • DC motor pump with unchangeable flow rate, but extremely low loading to tubing.
  • Its compact size saves space to install.


SPECIFICATIONS
General Information
SizeW120 x D80 x H100 (mm)
Weight514 g